Numerical Analysis of Discrete Nonlinear Fracture Mechanics
Because cementitious materials tend to fail by fracture along discrete interfaces, it makes sense to analyze this behavior with discrete nonlinear fracture mechanics. Using the finite...
Computational Framework for 3D Nonlinear Discrete Crack Analysis
Under contract from the Electric Power Research Institute (EPRI) to investigate the applicability of fracture mechanics to concrete dams, the authors are involved in the development of...
Properties of Aggregate-Cement Interface for High Performance Concrete
An experimental study of the interfacial zone between aggregate and cement paste was undertaken. Various factors such as type of aggregate, treatment of aggregate surface, mixing process...
Mechanical Properties of High Performance Concretes
This paper presents some of the initial results of a 4-year research project on mechanical properties of high performance concretes with particular reference to highway applications. High...
The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...
Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...
Finite Element Large Deflection Analysis of Cylindrical Shells with Different Types of Cutouts
Nonlinear finite element is used to find the elastic buckling load and the maximum deflection for cylindrical shells subjected to unsymmetrical pressures due to wind. These shells are...
Form Comparison Without Anatomical Landmarks
The mathematical basis for various morphometric interpolating techniques is discussed. A technique, which enables analysis of biological forms without homologous anatomical landmarks,...
Mechanics of Granular Materials at Very Low Effective Stress Levels
Gravity's influence on laboratory specimens of uncemented granular materials subjected to low effective stresses, makes it impossible to evaluate constitutive properties in an unambiguous...
Structural Characterization of an Articulated-Truss Joint
A first generation space crane articulated-truss joint was statically and dynamically characterized in a configuration which approximated an operational environment. The articulated-truss...
Mechanical Properties of Lunar Soil and Simulants
Investigation of the physical and mechanical properties of lunar soil carried out by the USSR and the USA; both in situ and on returned samples, has resulted in considerable information...
Vacuum Melting and Mechanical Testing of Simulated Lunar Glasses
Lunar silicate glasses may possess superior mechanical properties compared to terrestrial glasses because the anhydrous lunar environment should prevent hydrolytic weakening of the strong...
Mechanical Properties of Compacted Lunar Simulant Using New Vacuum Triaxial Equipment
Mechanical stress-strain-strength properties of Arizona Lunar Simulant (ALS) are investigated by using a newly developed vacuum triaxial device that allows compaction under different initial...
An Analysis of Human Performance in Simulated Partial-Gravity Environments
Three unique partial gravity test environments; parabolic flight, water immersion and a mechanical-relief device provide the environment to evaluate human locomotion, reach sweeps, and...
Continuum Model for Flows in Emergent Marsh Vegetation
Modeling of flows in tidal marshes requires modifications to the classical equations of open channel flow. In this study, the authors formulate an equivalent continuum model for tidal...
Earthquake Considerations in Earth Dam Design
In 1963, the writer was engaged by the State of California Department of Water Resources to make a study of the influence of the hazard of earthquakes on the design of embankment type...
Stochastic Dynamics of Hysteretic Systems
A frequency domain method is discussed in order to evaluate the second order statistical response of nonlinear hysteretic structures. Both shear type systems and lumped mass frames involving...
Variability Response Functions and Stochastic Field Discretization in Stochastic Finite Element Methods
Stochastic systems whose mechanical properties vary spatially are investigated in the present paper. The stochastic response variability of the systems is characterized by means of the...
Responses of Nonlinear Oscillators Excited by Non-Gaussian Pulse Processes
The estimation of the response statistics of nonlinear systems subjected to Poisson-distributed pulse processes is addressed. The procedure to be followed is based on an extension of the...
Earthquake Ground Motion Modeling with Stochastic Line Source
Principles of geophysics and stochastics are applied to develop an earthquake model, in which the earth medium is idealized as consisting of stratified elastic layers, responding to seismic...
Return to search